The project revolves around automated, flexible laser processing designed to disassemble electronic devices to selectively extract valuable component parts at the end of their useful life. The laser cladding process resulted in 80% cost savings for a sawmill. An ultrashort-pulse laser can remove graphite-based anode material from 10-µm-thick copper foil at a rate of up to 1760 mm3/min without damaging it. Simple operation, power can be hand-held or with the robot to achieve automated cleaning. Without any chemical cleaning fluid, no supplies, safety and environmental protection.
The first widely noticeable use of lasers was the supermarket barcode scanner, introduced in 1974. The laserdisc player, introduced in 1978, was the first successful consumer product to include a laser but the compact disc player was the first laser-equipped device to become common, beginning in 1982 followed shortly by laser printers. The cells were genetically engineered to produce green fluorescent protein .
sheet metal laser cutting machine price
Improper heating will result in the substrate metal melting during the cleaning process, which is not acceptable especially in the module cleaning industry. With top quality laser beam adopted, the machine is able to ablates rust and dust from tough spots and achieves high cleaning precision in variousoccasions including metal surface dust removal, oil removal, stone cleaning, etc. Mactron Laser surface cleaning machine uses high-energy pulse laser beam to work on the work piece surface. The high energy will help to remove the surface rust layer and coating oil. Adopting optical fiber laser, full enclosed stable light path, lifelong free maintenance, air cooling, the hand held laser cleaner machine is compact and environmentally friendly. Besides, the hand held laser cleaner machine can be used not only for mental pollutants, but also non-metallic work piece.
One of the main benefits of cleaning with a laser is that it does not leave too much waste due to the irradiation process. Most of the remaining waste is dust particles, which users can easily collect and remove. You can also have a lot of control over the beam, which means you can reach the desired depth. In addition, you can irradiate the entire surface layer of the material, or irradiate a thinner layer, such as the top coat of a paint, instead of the underlying primer. If simple sandblasting is used, it is difficult to obtain such a high level of control.